Characteristics
- Type
- pneumatic
- Technology
- magnetic piston, tie-rod
- Configuration
- double-acting, single-acting
- Material
- stainless steel, aluminum
- Norms
- ISO 15552
- Other characteristics
- standard, with adjustable cushions, low-friction, tandem, low-temperature
- Stroke
-
Min.: 10 mm (0.394 in)
Max.: 2,500 mm (98.425 in)
- Pressure
-
Min.: 0.1 bar (1.5 psi)
Max.: 10 bar (145 psi)
- Speed
-
Min.: 10 mm/s
Max.: 1,000 mm/s (3.28 ft/s)
- Ambient temperature
-
Min.: -50 °C (-58 °F)
Max.: 60 °C (140 °F)
Description
» In compliance with ISO15552 standards and with the previous DIN/ISO 6431 – VDMA 24562 standards
» Rolled stainless steel rod
» Clean design with adjustable pneumatic cushioning
» Available special versions
TAND EM:
» Double thrust and traction forces
LOW FRICTION:
» Friction force reduced by over 40%
LOW TEMPERATURE:
» Versions for -40°C and for -50°C
G VARIANT FOR DUSTY APPLICATIONS:
» Highly resistant to dust, cement, resin, mud and wood residue
Series 61 cylinders comply with the ISO 15552 standards and can be assembled with the entire range of standard accessories. A permanent magnet, mounted on the piston in these cylinders,
enables information to be received regarding the piston position by means of proximity switches mounted in grooves along the cylinder profile. These grooves can be covered with a slot cover profile.
This cylinder series is equipped with adjustable end-stroke cushioning.
Moreover, they are equipped with a mechanical cushioning in order to reduce the impact of the piston as it reaches the end of the stroke.