Linear actuator 4778 series
Characteristics
- Movement
- linear
- Type
- electric
- Technology
- worm gear
- Motor
- DC
- Other characteristics
- compact, with integrated position sensor
- Force
-
Max.: 3,700 N
Min.: 1,000 N
- Speed
-
Max.: 0.04 m/s (0.15 ft/s)
Min.: 0.01 m/s (0.04 ft/s)
Description
Motor drive for through going spindle 4778
Powerful 24 V DC motor with worm gear, designed for non-rotating
through going spindle for pushing and pulling movements. A cable with
AMP plug and an integrated Hall sensor allows easy and secure control
of the entire system.
Special features
Two integrated Hall sensors for measurement of the revolutions and direction of rotation
Different type of internal thread for through going spindles
Good self-locking properties
Fast and powerful
Order spindle separately
Variant key
The variants are formed by different internal thread types for connecting
the spindles.
Technical notes
Spindle is not included; must be ordered seperatly.
Achtung: Note correct installation position (see installation example/position).
The drive must be protected against lateral forces by a guide system.
The drive working range (nominal torque) is determined for a service life of 10,000 double strokes
By using a controller with a short-circuit brake the holding torque position of the drive can be increased.
