Characteristics
- Type
- hydraulic
- Technology
- piston, cylinder
- Configuration
- single-acting
- Applications
- for lifting applications, for lifting
- Other characteristics
- compact, custom, small, low-profile, high-pressure
- Stroke
-
Max.: 15 mm (0.591 in)
Min.: 6 mm (0.236 in)
- Force
-
Max.: 1,496.8 kN
Min.: 43.1 kN
Description
CRM-XP Series are high pressure extra flat hydraulic cylinders for lifting operations with extremely reduced closed height, ideal for working in narrow spaces where it would be impossible to use other cylinders.
• Thanks to its small dimensions the cylinder is ideal for lifting machinery, alignment operations, releasing moulds and bridge crane maintenance.
• Hydraulic cylinders with spring return, 700 bar. Designed to operate in any position.
• Nitrox QPQ treatment to increase hardness and corrosion resistance.
• The stop ring not only guarantees maximum operator safety, preventing plunger over-stroke, but also outstanding eccentric load absorption.
• Custom made Hydraulic cylinders high pressure can be manufactured on customer request.
Extra flat cylinders – Low height hydraulic cylinder
Extra Flat hydraulic cylinders, spring return in high pressure. Pushing force from 5 to 100 tons with a stroke range from 4,5 mm to 150 mm. Extremely flat, and compact for use where other cylinders will not fit, suitable for lifting and pushing operations. Operating pressure 700 bar.
Guide surfaces are sized to guarantee optimal performance in absorbing the offset load and the end stroke ring increases safety for the operator by avoiding the extra stroke of the piston.
Hydraulic jacks equipped with high strength gaskets for maximum durability up to 60° C, upon request it is possible to equip the cylinder with gaskets resistant to high temperatures up to 200° C. Furthermore, the presence of the wiper prevents contamination from impurities present in the environment of use.