Linear actuator L7.101

CharacteristicsMovementlinearTypehydraulicStroke Max.: 250 mm (9.843 in)Min.: 80 mm (3.15 in)ForceMax.: 12.5 kNMin.: 4.5 kNSpeed0.03 m/s (0.08 ft/s)DescriptionL7.101 Linear actuators RH 1250 L7.101 Linear actuators RH 1250 max. lifting force 4.5 to 12.5 kN stroke…

Linear actuator L1.101

CharacteristicsMovementlinearTypeelectricStroke Max.: 600 mm (23.622 in)Min.: 100 mm (3.937 in)ForceMax.: 6,000 NMin.: 1,000 NSpeedMax.: 0.04 m/s (0.12 ft/s)Min.: 0.01 m/s (0.02 ft/s)Descriptionmax. lifting force 1000 to 6000 N stroke from 100 to 600 mm version with…

Linear actuator L4.202

CharacteristicsMovementlinearTypeelectricStroke Max.: 200 mm (7.874 in)Min.: 100 mm (3.937 in)ForceMax.: 600 NMin.: 300 NDescriptionL4.202 Linear actuators RA 60 K L4.202 Linear actuators RA 60 K max. lifting force 300 to 600 N stroke from…

Linear actuator MSL14 series

CharacteristicsMovementlinearTechnologystepper, ball screw, lead screwMotorDCVoltage12-voltApplicationsguideOther characteristicsintegrated, small, with integrated controllerForceMax.: 620 NMin.: 50 NRod diameter6 mm (0 in)DescriptionLinear stepper motors can dramatically reduce cost and save space. There is no coupling, no…

Linear actuator MSL11 series

CharacteristicsMovementlinearTypeelectricTechnologystepperMotorDCApplicationsguideOther characteristicssmallForceMax.: 340 NMin.: 30 NRod diameter5 mm (0 in)DescriptionLinear stepper motors can dramatically reduce cost and save space. There is no coupling, no additional bearing support and no assembly work required.…

Linear actuator MSL08 series

CharacteristicsMovementlinearTypeelectricTechnologystepper, ball screw, lead screwMotorDCOther characteristicsintegrated, smallForceMax.: 80 NMin.: 5 NDescriptionLinear stepper motors can dramatically reduce cost and save space. There is no coupling, no additional bearing support and no assembly work…

Rotary actuator RD5-RD53

CharacteristicsMovementrotaryTypeelectricDescriptionCompact positioning unit for secondary axes Integrated drive, position controller & encoder Closed loop position control Absolute multiturn encoder Boot loader via CAN RD53: Version with integral motor brake

Rotary actuator RD12A

CharacteristicsMovementrotaryTypeelectricOther characteristicswith brakeDescriptionRD12A rotary actuator with integral motor brake Job buttons Service interface Available with Profibus, Profinet, Powerlink, Modbus, Ethernet-IP, EtherCa or CANopen interface

Rotary actuator RD1A

CharacteristicsMovementrotaryTypeelectricOther characteristicscompactForce100 N, 200 NDescriptionDescription High performance brushless motor RS232 service interface for easy setup Real absolute multiturn encoder Technical details Output/Interface Profibus, Profinet, Powerlink, Modbus, Ethernet-IP, EtherCat, CANopen

Linear actuator VEE9200 series

CharacteristicsMovementlinearTypeelectricMaterialaluminumOther characteristicscontrol, integrated, with integrated controller, with integrated position sensorStroke 10 mm, 20 mm (0.394 in)Force8 N, 10 NTorque1.5 Nm (1.106 ft.lb)Description► 250 cycles per minute If speed is the…