Rotary actuator AG03/1

Description

Actuator AG03/1 Fieldbus
Fieldbus
High-performance compact actuator for complex positioning jobs
Profile AG03/1 Fieldbus:
Space-saving, easy mounting
Through hollow shafts up to max. ø14 mm
Brushless 50 W, 24 V EC motor with long service life
Integrated power and control electronics with inverse polarity and overload protection
Integrated absolute position encoder on the output shaft
integrated CANopen or Profibus-DP with M12 component mounting technology

integrated RS458/SIKONETZ5 interface with M8 component mounting technology
Mechanical data
Feature – Technical data – Additional information
Shaft – blacx-finished Steel –
Housing – aluminum/zincdie cast – anodized / powder-coated
Nominal torque/rated speed – 3.2 Nm at 100 rpm – i = 48
– 1.6 Nm at 200 rpm – i = 24
Operating mode – S3 intermittent operation: 25 % DC. 10 min. – EN 60034-1
Weight – ‘1.2 kg –
Electrical data – –
Feature – Technical data – Additional information
Operating voltage – 24 V DC ±10 % – reverse polarity protected. output stage
– 24 V DC ±10 % – reverse polarity protected. control (only CAN. PB. S3/09. IOL. IOL2)
Power input – 58 W – output stage
Battery – CR2477N, 3 V lithium. 950 mAh –
Battery service life – ‘5 year{s) – depending on ambient conditions
Parameter st orage – 105 cydes – also applies to calibration operations
Rated current – 2.4 A ±10 % – at max. adm. torque {output stage)
– <100 mA – at 24 V DC (control). only CAN. PB. S3/09. IOL. IOL2
Status display – two LEDs –
Keys – touch keys – for setting-up mode
Bus connection – CANopen. Profibus-DP. SIKONETZ5 – galvanic isolation of interface
– Profibus-DP – galvanic isolation of interface
– SIKONETZ5 – galvanic isolation of interface
– lO-Link. IOL – galvanic isolation between operating voltage, output stage and